RGBlink MSP 202 User Manual page 16

4. Double click the software of AVMSP , seen as follows:
Fig. 5.2 MSP 202 Control Software
① Select current small converter Model in the pull-down.
② User can set Comm Port and Comm Speed (Baudrate) through "Comm setup".
User can select current using serial port by the pull-down arrow. Comm Speed
should be 115200.
Fig. 5.3 MSP 202 Serial setting
Click" on" button to open the serial, The button will become .
Click this button can realize host computer software data sync with MSP
202 HD SD SDI Embeded
Note： When user change input or output format, SYNC should be started to make device
operate correctly.
③ For other operations, please refer to the fourth part Communication Software
Control Guide.
MSP 202 User Manual RGB-RD-UM-M202E001
13