RGBlink MSP 221 Quick Start

MSP 221 –
For full installation, configuration, and operation details, please refer to
NOTE
the MSP 221 user manual, which is available at www.rgblink.com.
This quick start provides basic instructions for an experienced
installer to set up and operate the MSP 221.
Interface Description
Input and Other Interface
Interfaces
1 Power Interface
2
5 Indicator
3
VGA Input
VGA Input
Input the video signal from H D player,
DVD, and computer, etc.
HDMI Input
Input the video signal from HD player,
DVD, set top box, computer, disk, etc.
USB Interface
Used to control the computer and upgrade.
Indicator
Power indicator 2 lights when device has power supply.
LED indicator 5 lights when connect USB to computer.
Power
Connect one end of the power adapter with the device,
the other end into a socket. Plug in, power indictor light
means the device works normally.
The device uses the standard 12V/3A power supply.
Output Inteface
1
DVI Output
Address：S601-608 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Email: sales@rgblink.com
4
HDMI Input
USB Interface
6
2
VGA Output
Fax:00865925771202
http://www.rgblink.cn
DVI Output
Connect to the monitor or LED screen
which has DVI interface.
VGA Output
Can connect to the device with VGA
input or VGA monitor.
Operation Manual
Program Area
Operation Manual
1. Power on, the 7 indicator light one by one, and then
all lights are off.
2. HDMI+COPY+ENTER:
Write external HDMI/DVI EDID into HDMI WRITE1;
3. HDMI+WRITE1+ENTER:
Write EDID of HDMI WRITE1 into HDMI/DVI IN;
4. HDMI+WRITE2+ENTER:
Write EDID of HDMI WRITE2 into HDMI/DVI IN;
5. VGA+COPY+ENTER:
Write external VGA EDID into VGA WRITE1.
6. VGA+WRITE1+ENTER:
Write EDID of VGA WRITE1 into VGA IN of other device.
(The EDID of VGA WRITE1 is RGBVGA which is
factory default;)
7. VGA+WRITE2+ENTER:
Write EDID of VGA WRITE2 into VGA IN of other device.
(The EDID of VGA WRITE2 is RGBVGA which is
factory default;)
8. EDID reset:
Press ENTER+WRITE2+WRITE1+COPY
+HDMI+VGA+COPY+WRITE1+WRITE2 in anticlockwise
to reset MSP 221 EDID.
MSP 221 Quick Start
Version 2.0
Page 1