FC 300 Operating Instructions
How to Programme
The FC 300 Graphical and Numerical LCP
"
The easiest programming of FC 300 frequency converters is performed by the Graphical Local Control Panel
(G-LCP): It is necessary to consult FC 300 Design Guide when using Numeric Local Control Panel (N-LCP).
How to Programme on the Graphical
"
Local Control Panel
The following instructions are valid for the
graphical LCP (LCP 102):
The control panel is divided into four
functional groups:
Graphical display with Status lines.
1.
Menu keys and indicator lights - changing
2.
parameters and switching between
display functions.
Navigation keys and indicator lights (LEDs).
3.
Operation keys and indicator lights (LEDs).
4.
All data is displayed in a graphical LCP display,
which can show up to five items of operating
data while displaying [Status].
Display lines:
Status
line:Status messages displaying
a.
icons and graphic.
b.
Line 1-2:
Operator data lines displaying data
defined or chosen by the user. By pressing the
[Status] key, up to one extra line can be added.
Status line:
Status messages displaying text.
c.
MG.33.A7.02 - VLT is a registered Danfoss trademark
33