Extend the server from the rack (on page 27).
o
Remove the server from the rack (on page 28).
o
Remove the access panel
4.
Remove the processor air baffle
5.
Remove the PCI riser cage
6.
Remove the fan cables, front IO (Input/Output) cables, FBWC cable, power supply cables, and
7.
Mini-SAS cables.
Remove the system board tray:
8.
Loosen the two thumbscrews.
a.
Lift the tray out of the chassis.
b.
Remove the power supply module
9.
Remove the common slot power supply cage.
10.
("Access
panel" on page 29).
("Processor air
baffle" on page 30).
("PCI riser
cage" on page 45).
("Power supply
module" on page 30).
Removal and replacement procedures 33