Capacitor Pack - HP ProLiant DL160 Gen8 Maintenance And Service Manual

Cache module on the system board
o
Cache module on a storage controller
o
To replace the component, reverse the removal procedure.

Capacitor pack

To remove the component:
Power down the server (on page 27).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 27).
o
Remove the server from the rack (on page 28).
o
Remove the access panel
4.
Remove the processor air baffle
5.
If the cache module is installed on the system board, remove the PCI riser cage
6.
page 45).
("Access panel" on page 29).
("Processor air baffle" on page 30).
("PCI riser
Removal and replacement procedures 49
cage" on