Front Video Adapter; Flexiblelom - HP ProLiant DL360p Gen8 Maintenance And Service Manual

Front video adapter

Remove the component as indicated.
CAUTION:
connector.
To replace the component, reverse the removal procedure.

FlexibleLOM

To remove the component:
WARNING:
remove the power cord to remove power from the server. The front panel Power On/Standby
button does not completely shut off system power. Portions of the power supply and some internal
circuitry remain active until AC power is removed.
Power down the server (on page 25).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove any attached network cables.
3.
Extend the server from the rack (on page 26).
4.
Remove the access panel
5.
Loosen the thumbscrew.
6.
Be sure to connect the video adapter to the video connector, and not to the USB
To reduce the risk of personal injury, electric shock, or damage to the equipment,
("Access panel" on page 29).
Removal and replacement procedures 39