Security Bezel; Access Panel - HP ProLiant DL160 Gen8 Maintenance And Service Manual

Disconnect each power cord from the server.
b.
Extend the server from the rack (on page 27).
4.
Release the locking latches.
5.
Disconnect the cabling, and then remove the server from the rack. For more information, see the
6.
documentation that ships with the rack mounting option.
Place the server on a sturdy, level surface.
7.

Security bezel

To access the front panel components, unlock and then remove the security bezel.
To replace the component, reverse the removal procedure.

Access panel

WARNING:
internal system components to cool before touching them.
CAUTION:
Operating the server in this manner results in improper airflow and improper cooling that can
lead to thermal damage.
To remove the component:
Power down the server (on page 27).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 27).
o
To reduce the risk of personal injury from hot surfaces, allow the drives and the
Do not operate the server for long periods with the access panel open or removed.
Removal and replacement procedures 29