HP ProLiant DL160 Gen8 Maintenance And Service Manual page 60

Remove the PCI riser cage
7.
Disconnect all fan cables from the system board and then remove all fans.
8.
Disconnect all cables connected to the system board
9.
more information, see "Cabling (on page 81)."
Remove the FlexibleLOM
10.
Remove all DIMMs ("DIMMs" on page 52).
11.
Remove the heatsink ("Heatsink" on page 53).
12.
Open each of the processor locking levers in the order indicated, and then open the processor retaining
13.
bracket.
Remove the processor from the processor retaining bracket.
14.
CAUTION: To avoid damage to the processor, do not touch the bottom of the processor,
especially the contact area.
("PCI riser cage" on page 45).
("FlexibleLOM option" on page 44).
("System board components" on page 74). For
Removal and replacement procedures 60