Fbwc Module - HP ProLiant DL160 Gen8 Maintenance And Service Manual

CAUTION:
module. Detaching the cable causes any unsaved data in the cache module to be lost.

FBWC module

To remove the component:
Power down the server (on page 27).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 27).
o
Remove the server from the rack (on page 28).
o
Remove the access panel
4.
Remove the processor air baffle
5.
If the cache module is installed on the system board, remove the PCI riser cage
6.
page 45).
Disconnect the capacitor pack cable from the cache module.
7.
Remove the cache module:
8.
Do not detach the cable that connects the battery pack or capacitor pack to the cache
("Access panel" on page 29).
("Processor air baffle" on page 30).
Removal and replacement procedures 48
("PCI riser cage" on