Heatsink - HP ProLiant DL160 Gen8 Maintenance And Service Manual

Remove the processor air baffle
5.
Do one of the following:
6.
Disconnect the USB cable from the system board, and then remove the internal USB connector from
o
the LFF drive cage.
Disconnect the USB cable from the system board, and then remove the internal USB connector from
o
the SFF drive cage.
To replace the component, reverse the removal procedure.

Heatsink

To remove the component:
Power down the server (on page 27).
1.
Remove all power:
2.
("Processor air baffle" on page 30).
Removal and replacement procedures 53