Calibrations - ICP DAS USA TPD-280 User Manual

TPD/VPD Series HMI Device User Manual

4. Calibrations

Usually users need not to calibrate the touch screen because we calibrate the TouchPAD devices
before shipping. However, in cases users may need to calibrate the touch screens, we introduce the
flow below.
You can find that the calibration programs are in the following directory:
"[HMIWorks_Install_Path]\bin\boot\[Device_Name]\calibrate".
For example, there are two calibration programs can be found at
"C:\ICPDAS\HMIWorks_Standard\bin\boot\TPD-433\calibrate" if trying to calibrate TPD-433. And
in the same directory of the calibrate file, there's a batch file which is used to download the
calibrate programs to the TouchPAD device and it is called "calibrate.bat".
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved. Page: 94