Pin Assignments; Tpd-280/283/430/433 Series Models - ICP DAS USA TPD-280 User Manual

TPD/VPD Series HMI Device User Manual

2.2 Pin Assignments

2.2.1 TPD-280/283/430/433 Series Models

Models supported include TPD-280, TPD-280U, TPD-280-H, TPD-280U-H, TPD-280-Mx, TPD-283,
TPD-283U, TPD-283U-H, TPD-283U-Mx, TPD-430, TPD-430-H, TPD-430-EU, TPD-430-H-EU TPD-433,
TPD-433-H, TPD-433-EU and TPD-433-H-EU.
TPD-280/280U/280-H/280U-H/TPD-280-Mx
TPD-283U/283U-H/TPD-283U-Mx

Pin Name
Data-
2-wire RS-485 Serial Port
Data+
GND Ground Connection
VDC DC Power Input
F.G. Frame Ground
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.
Function Description
The use as the power supply applies to TPD-280/283/430/433
Series models.

For TPD-280/280U/283U/430/430-EU/433/433-EU:
The valid power voltage range is from +10 to +30 V

For TPD-280-H/280U-H/283U-H/280-Mx/283U-Mx/
430-H/430-H-EU/433-H/433-H-EU:
The valid power voltage range is from +12 to +48 V
Frame Ground is connected to the inside EMI or ESD
suppression circuits. Make sure that F.G. is connected to the
Earth.
TPD-430/430-H/430-EU/430-H-EU
TPD-433/433-H/433-EU/433-H-EU

DC.
DC.
Page: 41