Specifications; Tpd-280/280U/283/283U - ICP DAS USA TPD-280 User Manual

TPD/VPD Series HMI Device User Manual

1.4 Specifications

Note: Communication interface that is only for run time supports the following protocols:
1. For the case of RS-485, Modbus RTU Master and DCON Protocol Master (for ICP DAS I-7000
series modules) are supported. We provide API functions to open COM Port for sending/receiving
strings through RS-485.
2. For the case of Ethernet, Modbus TCP Master is supported. We provide API functions to
sending/receiving strings through TCP.
3. USB is used for firmware update only.

1.4.1 TPD-280/280U/283/283U

Models
CPU Module
CPU
Memory Expansion
Real Time Clock (RTC)
Buzzer
Rotary Switch (0 ~ 9)
Communication Interface
Ethernet
Serial Port
USB 1.1 Client
MMI (Main Machine Interface)
LCD
Backlight Life
Brightness
Touch Panel
Reset Button
Electrical
Powered from Terminal Block
Powered from PoE
Power Consumption
Mechanical
Dimensions (W x L x H)
Installation
Ingress Protection
Environmental
Operating Temperature
Storage Temperature
Ambient Relative Humidity
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.
TPD-280 TPD-280U
- 16 MB SDRAM /
8 MB Flash
- Yes
-
RS-485 (including Self-Tuner)
-
Firmware update only
2.8 TFT (Resolution 240 x 320 x 16), defective pixels <= 3
+10 ~ +30 V
DC
-
76 mm x 119 mm x 31 mm
10 ~ 90% RH, non-condensing
TPD-283
32-bit RISC CPU
-
-
Yes
Yes
RJ-45 x 1, 10/100 Base-TX
-
-
20,000 hours
160 cd/m2
Yes
Yes
-
IEEE 802.3af, Class1 (48 V)
1.2 W
Wall Mounting
Front Panel: IP40
-20 ~ +70°C
-30 ~ +80°C
TPD-283U
16 MB SDRAM /
8 MB Flash
Yes
RS-485 (including
Self-Tuner)
Firmware update only
+10 ~ +30 V
DC
Page: 12