Access A Modbus Rtu Slave Device - ICP DAS USA TPD-280 User Manual
Tpd series models,
tpd high speed
series models,
vpd series models,
vpd high speed
series models
Hide thumbs
Also See for TPD-280:
- User manual (186 pages) ,
- Programming manual (85 pages) ,
- User manual (29 pages)
Table of Contents
Advertisement
TPD/VPD Series HMI Device User Manual
5.2 Access a Modbus RTU Slave Device
Using an M-7060 module (I/O Module with 4-channel Relay output, 4-channel Digital Input) as an
example, connect the Modbus RTU slave device to the TouchPAD model on RS-485 COM Port and
apply power to the Modbus RTU slave device and TouchPAD model.
The following will access to connect to Modbus RTU slave device through HMIWorks configuration:
Step 1: In the HMIWorks software, click the "Register Devices (I/O)" option from the "HMI" menu
to open the "Devices" dialog box, or press F3.
Step 2: Select "Modbus RTU Master" from the "TouchPAD is" drop down menu.
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.
Page: 100
Hide quick links:
Advertisement
Table of Contents
