TPD/VPD Series HMI Device User Manual
2.4.3 Panel Mounting
The VPD Series device can be mounted on a panel of maximum thickness 5
mm. Adequate access space can be available at the rear of the instrument
panel for wiring and servicing purposes.
2. Attach the View PAC to the cut-out hole.
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.
Panel thickness up to 5 mm
1. Prepare the panel and cut the hole to the
specified size. The detailed about panel cut-out size
depends on the type of VPD Series, please refer to
Section 2.3
Dimensions.
Page: 61