Chapter 1
Install the 1756-L7x Controller
Insert the Key
24
1. Align the circuit board with the top and bottom guides in the chassis.
2. Slide the module into the chassis until it snaps into place.
3. Verify that the controller is flush with the power supply or other installed
modules.
After you have inserted the controller into the chassis, reference the
the Module on page 183
After the controller is installed, insert the key.
Rockwell Automation Publication 1756-UM001O-EN-P - October 2014
Top Circuit Board
Aligned
Log ix 55xx
RUN FORCE SD
OK
for information to interpret the status indicators.
Log ix 55x x
RUN FORC E SD
OK
Bottom Circuit Board
Aligned
Troubleshoot