Remove a CompactFlash Card from a Series A Controller
Complete these steps to remove a CompactFlash card from a series A controller.
1
1. Lay the controller in its side with the mode switch facing left.
2. Raise the locking clip.
3. Gently pull the card out of the slot.
Install a CompactFlash Card in a Series B Controller
Complete these steps to install a CompactFlash card in a series B controller.
2
4
1. Open the door of the controller and push the CompactFlash latch to the
left.
Rockwell Automation Publication 1756-UM001O-EN-P - October 2014
Install the 1756-L6x Controller
2
3
1
3
Chapter 2
37