Allen-Bradley 1756-L61 User Manual page 67

Indicates the SD card is locked.
The following table describes the Automatic Firmware Update options
that you can choose for the project. The Automatic Firmware Update
property is also referred to as the Firmware Supervisor feature.
If you want to
Enable automatic firmware updates so I/O devices in the
configuration tree of the controller that are configured to use
Exact Match Keying are updated as required
Disable automatic firmware updates and remove any I/O
firmware files that are stored with the image
Disable automatic firmware updates when there are no
firmware files are stored with the image
(1) The devices that are used with this option must support the revision of firmware being updated to.
4. Click Store and click OK in the confirmation dialog box that appears.
Store is dimmed (unavailable).
Rockwell Automation Publication 1756-UM001O-EN-P - October 2014
Start Using the Controller Chapter 3
Then choose
(1)
Enable and Store Files to Image
Disable and Delete Files from Image
Disable
67