Allen-Bradley 1756-L61 User Manual page 134

Chapter 8 I/O Modules
134
2. Specify the communication module properties according to your network
configuration.
For more information about the communication module and network
properties, see the
3. Right-click the communication network and choose New Module.
4. Add the communication adapter for the distributed I/O platform that you
are using.
5. Specify the module and connection properties according to your network
configuration.
6. Right-click the bus of the newly added communication adapter and choose
New Module.
7. Select the I/O module that you want to add and click OK.
Rockwell Automation Publication 1756-UM001O-EN-P - October 2014
Additional Resources section in the preface.