Allen-Bradley 1756-L61 User Manual page 40

Chapter 2 Install the 1756-L6x Controller
40
For information to install a 1756-BATM battery module or replace a 1756-
BATM assembly, see the ControlLogix Battery Module Installation Instructions,
publication 1756-IN576.
ATTENTION: For a series A controller, connect only a 1756-BA1 battery or a
1756-BATM battery module. The use of other batteries can damage the
controller.
Wire Terminal Location
Top
Middle
Bottom
1. Connect the battery connector to the port to the right of the battery slot.
2. Snap the battery into the battery slot.
3. Write the date on the battery label.
4. Attach the label to the inside of the controller door.
Install the Battery on a Series B Controller
Complete these steps to install the battery on a series B controller.
ATTENTION: For a series B controller, connect only a 1756-BA2 battery. The
use of other batteries can damage the controller.
Rockwell Automation Publication 1756-UM001O-EN-P - October 2014
Connected Wire
No connection
Black lead (-)
Red lead (+)
DATE