Gland/Conduit Entry - Ip21 (Nema 1) And Ip54 (Nema12) - GE AF-600 FP Operating Instructions Manual

Mechanical Installation
4.3.8 Gland/Conduit Entry - IP21 (NEMA 1)
and IP54 (NEMA12)
Cables are connected through the gland plate from the
bottom. Remove the plate and plan where to place the
entry for the glands or conduits. Prepare holes in the
marked area on the drawing.
NOTE
The gland plate must be fitted to the drive to ensure the
specified protection degree, as well as ensuring proper
cooling of the unit. If the gland plate is not mounted, the
drive may trip on Alarm 69, Pwr. Card Temp
Cable entries viewed from the bottom of the drive - 1)
Mains side 2) Motor side
Illustration 4.31 Example of Proper Installation of Gland Plate.
Illustration 4.32 Unit Sizes 41 + 42
AF-600 FP High Power Operating Instructions
Illustration 4.33 Unit Size 51
Unit Size 61 to 64: Cable entries viewed from the bottom
of the drive - 1) Place conduits in marked areas
Illustration 4.34 Unit Size 61
Illustration 4.35 Unit Size 62
4 4
63