GE AF-600 FP Operating Instructions Manual page 125

General Specifications
3) Measured using 5 m screened motor cables at rated load and rated frequency.
4) The typical power loss is at nominal load conditions and expected to be within +/-15% (tolerence relates to
variety in voltage and cable conditions). Values are based on a typical motor efficiency (eff2/eff3 border line).
Motors with lower efficiency will also add to the power loss in the drive and opposite. If the switching frequency is
increased comed to the default setting, the power losses may rise significantly.keypad and typical control card
power consumptions are included. Further options and customer load may add up to 30W to the losses. (Though
typical only 4W extra for a fully loaded control card, or options for slot A or slot B, each).
Although measurements are made with state of the art equipment, some measurement inaccuracy must be
allowed for (+/-5%).
7 7
124
AF-600 FP High Power Operating Instructions