Mechanical Dimensions - GE AF-600 FP Operating Instructions Manual

Mechanical Installation
4 4
Illustration 4.4 Recommended Lifting Method, Unit Size 62
(460V, 1000 to 1200 HP, 575/600V, 1250 to 1350 HP).
Illustration 4.5 Recommended Lifting Method, Unit Size 63
(460V, 600 to 900 HP, 575/600V, 900 to 1150 HP).

4.2.5 Mechanical Dimensions

* Please note airflow directions
42
AF-600 FP High Power Operating Instructions
Illustration 4.6 Recommended Lifting Method, Unit Size 64
(460V, 1000 to 1200 HP, 575/600V, 1250 to 1350 HP).
NOTE
The plinth is provided in the same packaging as the drive
but is not attached to Unit Sizes 61-64 during shipment.
The plinth is required to allow airflow to the drive to
provide proper cooling. The unit sizes 6X should be
positioned on top of the plinth in the final installation
location. The angle from the top of the drive to the lifting
cable should be 60°C or greater.
In addition to the drawings above a spreader bar is an
acceptable way to lift the unit sizes 6X.