Mitsubishi GOT2000 Series User Manual page 71

POINT POINT POINT
(1) When connecting to an external device which does not have clock function
If set to [Adjust] or [Broadcast] for clock setting while the GOT is connected to external
devices (PLC or microcomputers) which do not have clock function, the clock data will not be
adjusted.
Refer to the following for the list of PLC installed with clock function.
➠
GOT2000 Series Connection Manual for the controller used
➠
GT Designer3 (GOT2000) Help
(2) Clock setting when using the multi-channel function
The channel No. of a controller whose clock is used as a base or adjusted cannot be set by
the utility.
The controller whose clock is used as a base or adjusted can be set by GT Designer3.
For channel settings, refer to the following.
➠
GOT2000 Series Connection Manual for the controller used
➠
GT Designer3 (GOT2000) Help
(3) Setting of clock setting and battery
The connector of the GOT is not connected to the battery connector at purchase.
When selecting [Broadcast] or [None] in clock setting, set the clock of the GOT once with
connecting a battery to the GOT.
(4) Operation setting by GT Designer3
Set the clock management at [GOT set up] in [Environmental Setting] of GT Designer3.
When change a part of the setting, change the setting by the GOT display setting after
downloading the project data.
➠
GT Designer3 (GOT2000) Help
Step 1.
If touch the setup item, the setup
contents is changed.
Adjust
Broadcast
Adjust/Broadcast
Adjust (SNTP server is available)
Adjust/Broadcast (SNTP server is available)
None
Step 2.
If touch the [OK] button, the GOT
restarts and operates with the
changed settings.
If touch the [Cancel] button, the
changed settings are canceled and the
screen returns to the Main Menu.
2.9 Time
2
2 - 31