Mitsubishi GOT2000 Series User Manual page 450

(2) Restoration
The following shows the operation procedure of the restoration after the password for the backup/restoration has
Touch [Restore] on the main menu.
15.8.6 Display operation of backup and
restoration
Input the password for the backup/restoration.
No
Automatic authentication is conducted using
the password on the controller side saved in
the backup data.
Yes
Yes
(When a multiple CPU system is used)
Is there any other controller
Yes
(When a controller list file exists)
15 - 52
15.8 Backup and Restoration
Is the password correct?
Yes (for other than FXCPU)
Is there any password set
for the file to be restored?
Yes
Is the password correct?
Yes
File is restored.
Is there any other file?
No
Is there any other units?
No
that is to be backed up?
No
Restoration is completed.
been set.
Yes (for FXCPU)
When the PLC is not in the STOP status,
change its status to the STOP status.
No
Input the changed
No
password on the
controller side manually.
If a keyword has been set, clear it.