Mitsubishi GOT2000 Series User Manual page 392

(3) Function setting operation
13 - 16
13.2 Operator Authentication
Step 1.
Touch [Operator] → [Function], and
then the Admin password
authentication dialog box is
displayed.
Step 2.
When the administrator password is
correctly input, the Function setting
screen in displayed.
Touch the [Next] switch to switch the
setting screen, and touch an item to
be set.
(a) Auth method
(b) Auto logout time
(c) Expiration date
(d) Ext. auth. ID Initial position
(e) Ext. auth. ID Valid byte count
(a) Auth method
The authentication method is switched.
Touching the authentication method switches
the selected item in order of [Password] → [Ext.
auth. ] → [Ext. auth. / Password].
(b) Touch [Automatic logout time] to display the ten-
key pad. Input a setting time. When the input is
completed, touch the [ENT] key.
(c) Touch Expiration date to display the ten-key
pad. Input a setting time. When the input is
completed, touch the [Enter] key.
(d) Ext. auth. ID Initial position
The starting position of an external
authentication ID (Number of bytes) can be set
from the data read from an external
authentication device.
(e) Ext. auth. ID Valid byte count
The valid number of bytes for an external
authentication ID can be set.
(This setting is available only when [External
auth] or [Ext. auth. / Password] is set as the
authentication method.)
Step 3.
Touching the
on the upper right saves the setting
contents and returns to the previous
screen.
button displayed