Mitsubishi GOT2000 Series User Manual page 65

Graphic operation terminal

Hide thumbs Also See for GOT2000 Series:

Table of Contents

(2) Precautions on using the alarm popup display

When [Display Position Switching] is set to [Switch] in the alarm popup display setting, set

either of the following for the utility call key.

• Setting the position of the utility call key to the upper-right or lower-left corner

• Setting [Pressing Time] of the utility call key to 1 or more seconds

When [Pressing Time] is set to 0 and the key position is set to the lower-left corner, the

operation is as described below. If the positions of the key and the alarm popup display

overlap, the utility screen appears by switching the display position of the alarm popup

For the alarm popup display, refer to the following.

GT Designer3 (GOT2000) Help

2.7 Utility Call Key