Mitsubishi GOT2000 Series User Manual page 449

■2. How to use the password for the backup/restoration
The following shows the operation procedure of the backup after the password for the backup/restoration has been set.
For details of the operation screen, refer to the following.
➠ 15.8.6 Display operation of backup and restoration
(1) Backup
Touch [Backup] on the main menu.
(Second backup or later)
15.8.6 Display operation of backup and
restoration
Input the password for the backup/restoration.
No
Is the password correct?
Is there any password set for
the file to be backed up?
Automatic authentication is conducted using
the password on the controller side saved in
the backup setting (in units of files).
Is the password correct?
Yes
Is there any other file?
Yes Is there any other units?
CPU system is used)
Is there any other controller
Yes
that is to be backed up?
(When a controller list file exists)
Was the password on the
controller side changed?
Backup is completed.
Start
Yes (for other than FXCPU)
Yes
Yes
File is backed up.
No
(When a multiple
No
No
No
POINT POINT POINT
Precautions for backing up data after the password on the controller side has been
changed
When the password on the controller side is being input manually and inputting the password is
canceled to stop the backup, all the files that have been backed up before the cancellation are
discarded.
Yes (for FXCPU)
If a keyword has been set, clear it.
No
No Input the changed
password on the
controller side manually.
Set the password for the backup/restoration
using 32 characters or less
(alphanumeric characters and symbols only).
Yes
15.8 Backup and Restoration
15
15 - 51