■3. Utility call key setting operation
12 - 12
12.2 Operation Settings (Settings for Operation)
POINT
POINT
POINT
(1) When the utility call key is not set (set to 0-point)
Even when the utility call key is not set (set to the zero point), you can display the main menu
by performing the following operation.
• Pressing the special function switch set on the user-created screen
➠
9.3.1 Display operation of main menu
(2) When limiting the display and operation of the utility
When limiting the display and operating users, set a password to the GOT using GT
Designer3. If a user tries to display the main menu of the utility, the password is displayed.
Refer to the following for the details related to the password setting.
➠
GT Designer3 (GOT2000) Help
Step 1.
Touch
or
four corners of the setting screen. The
button repeats
time it is pressed. Change the part to
be set as a key position to
For the key position, 0 or 1 point can
be specified.
Step 2.
When setting 1 point, specify the time
to switch to the utility in case of
keeping pressing the key position.
Touch the time input area.
Step 3.
Touching the input area displays a
keyboard.
Input numeric with the keyboard.
Step 4.
Touch the
changes.
displayed at the
every
.
button to save the