Operation Procedures - Mitsubishi GOT2000 Series User Manual

16.2.6

Operation procedures

This section describes the contents of the MELSEC-FX list editor and the key functions displayed on the screen.
■1. Key arrangement and a list of key functions
The arrangement and functions of the keys displayed on the MELSEC-FX List Editor window are described below.
■2. Displayed contents
1)
3)
No. Item
1) Channel No
2) Mode
3) Error message
4) List display area
5) Key area
2)
4)
Displays the currently selected channel number.
Touching "ChNo." displays the communication setting window.
The communication setting window is not displayed if the MELSEC-FX list editor is started
from the FX ladder monitor.
Displays a mode for MELSEC-FX list editor.
➠
16.2.7 Selection and operation of modes
[Monitor] is displayed when the list monitor is executed.
➠
16.2.17 List monitor
Displays the contents of errors that occur with the MELSEC-FX list editor.
➠
16.2.19 Error messages and corrective actions
Displays the sequence program in list format (12 digits).
The position (line) that can be edited is displayed with a bar.
Displays the keys that can be used with the MELSEC-FX list editor.
5)
Display contents
16.2 FX List Editor (GT2104-R only)
16
16 - 19