Mitsubishi GOT2000 Series User Manual page 336

➠
11 - 8
11.1 Standard I/F
POINT POINT POINT
Communication parameters
The types of items that are in the communication parameter setting menu depend on the type of
communication driver that is installed on the GOT in use.
Refer to the section below for the setting contents of various drivers.
GT Designer3 (GOT2000) Help
Step 3.
Touch the numerical values of baud rate
to switch them repeatedly.
Example: 4800 bps 9600 bps 19200 bps
The numerical values are set using the
ten-key depending on the setting.
"0" to "9":
Use these keys to enter numerical
values. Enter "0" to disable the screen
saver function.
"ESC":
Closes the ten-key window without
saving any value entered
"AC":
Deletes the entire string of numerical
characters that are being entered
"DEL":
Deletes a digit from a string of numerical
characters that are being entered
"ENT":
Enters the value for the clock that has
been entered and closes the ten-key
pad window
"+/-":
Switches between positive and negative
values. (Only positive values are valid
for the clock setting.)
".":
Invalid key (not used)
Step 4.
Touch the
window confirming whether to save the
settings.
Step 5.
Touch the [YES] button to save the
settings and restart. Touch the [NO]
button to discard the changes.
button to display the