Selecting An Application Macro - ABB ACH550-01 User Manual

Selecting an application macro

To select an application macro, follow these steps:
1 Press MENU to go to the
main menu.
2 Select ASSISTANTS with
the UP/DOWN keys and
press ENTER.
3 Scroll to Application and
press SEL.
4 Select a macro with the UP/
DOWN keys and press
SAVE.
5 If you want to use the
mechanical HAND-OFF-
AUTO switch, press OK. If
you do not want to use it,
select No with the DOWN
key and then press OK.
To be able to use the
switch, EXT1 (HAND) Start
command must be
connected to DI1 and EXT2
(AUTO) Start command to
DI6.
94
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
ACH550-01 User's Manual
OFF
0. 0 Hz
0. 0 A
0. 0 %
00:00
OFF MAIN MENU
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT 00:00
OFF ASSISTANTS
Spin the motor
Commission drive
Application
References 1 & 2
Start/Stop Control
EXIT 00:00
OFF PAR EDIT
9902 APPLIC MACRO
HVAC DEFAULT
[1]
EXIT
00:00
OFF CHOICE
Do you want to
use mechanical
HAND-OFF-AUTO switch?
Yes
No
EXIT 00:00
Application macros and wiring
0.0Hz
MENU
2
ENTER
3
SEL
SAVE
OK