Parameters Mode - ABB ACH550-01 User Manual

Parameters mode

To change the parameters, follow these steps:
1 Press MENU to go to the
main menu.
2 Select PARAMETERS with
the UP/DOWN keys and
press ENTER to go to the
Parameters mode.
3 Select the appropriate
parameter group with the
UP/DOWN keys and press
SEL.
4 Select the appropriate
parameter in a group with
the UP/DOWN keys. Press
EDIT to change the
parameter.
5 Press the UP/DOWN keys
to change the parameter
value.
6 Press SAVE to store the
modified value or press
CANCEL to leave the set
mode. Any modifications
not saved are cancelled.
7 Press EXIT to return to the
listing of parameter groups,
and again to return to the
main menu.
To complete the control connections by manually entering the
parameters, see chapter
74
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
ACH550-01 User's Manual
OFF
OFF
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT
OFF
99 START-UP DATA
01 OPERATING DATA
03 FB ACTUAL SIGNALS
04 FAULT HISTORY
10 START/STOP/DIR
EXIT
OFF
9901 LANGUAGE
9902 APPLIC MACRO
9904 MOTOR CTRL MODE
9905 MOTOR NOM VOLT
EXIT
OFF
9902 APPLIC MACRO
HVAC DEFAULT
[1]
CANCEL
OFF
9902 APPLIC MACRO
SUPPLY FAN
[2]
CANCEL
OFF
9901 LANGUAGE
9902 APPLIC MACRO
9904 MOTOR CTRL MODE
9905 MOTOR NOM VOLT
EXIT
Parameter listing and
Start-up and control panel
0.0Hz
0. 0 Hz
0. 0 A
0. 0 %
00:00 MENU
MAIN MENU 1
00:00 ENTER
PAR GROUPS 99
00:00 SEL
PARAMETERS
HVAC DEFAULT
00:00 EDIT
PAR EDIT
00:00 SAVE
PAR EDIT
00:00 SAVE
PARAMETERS
SUPPLY FAN
00:00 EDIT
descriptions.