ABB ACH550-01 User Manual page 264

ACH550-01 User's Manual
Code Description
3405 OUTPUT1 UNIT
Selects the units used for the first display parameter.
Note: Parameter is not effective if parameter 3404
9 ( ).
DIRECT
0 = 9 = °C
NO UNIT
1 = A 10 = lb ft
2 = V 11 = mA
3 = Hz 12 = mV
4 = % 13 = kW
5 = s 14 = W
6 = h 15 = kWh
7 = rpm 16 = °F
8 = kh 17 = hp
The following units are useful for the bar display
117 = %ref 118 = %act 119 = %dev 120 = % LD 121 =% SP 122 = %FBK 123 = Iout
125 = Fout 126 = Tout 127 = Vdc
3406 OUTPUT1 MIN
Sets the maximum value displayed for the first display parameter.
Note: Parameter is not effective if parameter 3404
9 ( ).
DIRECT
3407 OUTPUT1 MAX
Sets the maximum value displayed for the first display parameter.
Note: Parameter is not effective if parameter 3404
9 ( ).
DIRECT
3408 SIGNAL2 PARAM
Selects the second parameter (by number) displayed on the control
panel.
• See parameter 3401.
3409 SIGNAL2 MIN
Defines the minimum expected value for the second display parameter.
• See parameter 3402.
3410 SIGNAL2 MAX
Defines the maximum expected value for the second display parameter.
• See parameter 3403.
3411 OUTPUT2 DSP FORM
Defines the decimal point location for the second display parameter.
• See parameter 3404.
3412 OUTPUT2 UNIT
Selects the units used for the second display parameter.
• See parameter 3405.
Parameter listing and descriptions
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
18 = MWh 27 = ft 36 = l/s
19 = m/s 28 = MGD 37 = l/min
3
20 = m /h 29 = inHg 38 = l/h
3
21 = dm /s 30 = FPM 39 = m
22 = bar 31 = kb/s 40 = m
23 = kPa 32 = kHz 41 = kg/s
24 = GPM 33 = ohm 42 = kg/m
25 = PSI 34 = ppm 43 = kg/h
26 = CFM 35 = pps 44 = mbar 53 = lb/s
Range
0...127
1
OUTPUT
45 = Pa 54 = lb/m
46 = GPS 55 = lb/h
47 = gal/s 56 = FPS
3
/s 48 = gal/m 57 = ft/s
3
/m 49 = gal/h 58 = inH
3
50 = ft /s 59 = in wg 68 = Km
3
51 = ft /m 60 = ft wg
3
52 = ft /h 61 = lbsi
62 = ms
-
1
OUTPUT
-
1
OUTPUT
100...178
-
-
0...9
0...127
=
DSP FORM
63 = Mrev
64 = d
65 = inWC
66 = m/min
O 67 = Nm
2
3
/h
124 = Vout
=
DSP FORM
=
DSP FORM
259