ABB ACH550-01 User Manual page 161

Code Setting for fieldbus control & description Range
1410 RELAY OUTPUT 4...6
...
Defines the event or condition that activates relay 4...6 – what relay
1412
outputs 4...6 means.
• See 1401
Analogue output signal source selection
Code Setting for fieldbus control & description Range
1501 AO1 CONTENT SEL
Defines the content for analogue output AO1.
135 = c
OMM VALUE
communication (parameter 0135).
136 = c
OMM VALUE
communication (parameter 0136).
1502 AO1 CONTENT MIN
Sets the minimum
content value.
• Content is the
parameter
selected by
parameter 1501.
• Minimum value
refers to the
minimum content
value that will be
converted to an
analogue output.
• These
parameters
(content and
current min. and
max. settings)
provide scale
and offset
adjustment for
the output. See
the figure.
1503 AO1 CONTENT MAX
Sets the maximum content value
• Content is the parameter selected by parameter 1501.
• Maximum value refers to the maximum content value that will be
converted to an analogue output.
1504 MINIMUM AO1
Sets the minimum output current.
156
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1.
RELAY OUTPUT
1 – Energise output based on the input from fieldbus
2 – Energise output based on the input from fieldbus
P 1505 /
P 1511
P 1504 /
P 1510
P 1505 /
P 1511
P 1504 /
P 1510
ACH550-01 User's Manual
0...47
99...178
-
AO (mA)
P 1502/1508
P 1503/1509
AO (mA)
P 1502/1508
P 1503/1509
-
0.0...20.0 mA
Serial communications
AO CONTENT
AO CONTENT