Table of Contents
Advertisement
If you want the Access Point to receive an IP address via the first or second method
described above, then choose the Use DHCP option within the Access Point's configu-
ration screen (accessed via the Web browser interface). Note that Use DHCP is the
Access Point's default setting.
Otherwise, select Specify IP and enter a static IP address, subnet mask, and default
gateway in the fields provided.
Click <SAVE> within the Access Point's configuration screen to save these changes.
Any changes to the Access Point's IP Addressing parameters will take effect immedi-
ately (if the System's AP Controllers are running firmware version 1.1 or greater).
However, if you find that the new IP address has not taken effect, try recycling power
on the Access Point.
Note:
Refer to the Harmony Access Point Controller Model 7560 User's Guide for
information on additional Access Point parameters, such as Group Member-
ship and Auto Image Synchronization Upon Reboot.
24
Advertisement
Table of Contents
