Chapter 4 — Manage the Computer
How to Launch Applications Automatically
How to Update the System Software
Update the Computer with SmartSystems
74
There are two ways to launch applications automatically on a cold
boot:
•
Set up your application .cab file to place a shortcut to the
application in the \Windows\StartUp directory at install time.
•
Use AutoRun to start your application at boot time. AutoRun ships
on the computer and automates other operations. At boot time,
AutoRun executes any commands found in its data file,
Autouser.dat. For more information on using AutoRun, see the
Readme.txt file located in the My Device\Flash File Store\2577
directory on the computer.
The mobile computer uses SmartSystems bundles to update the
operating system (OS) and the system software.
You can use these methods to update your mobile computer:
•
You can update individual computers, or multiple computers at
the same time, using the SmartSystems console. For help, see the
next section.
•
You can update individual computers using an SD card.
You can use the SmartSystems console to update the operating system
or system software on your mobile computer. Before you can update
the computer with this method, you need:
•
SmartSystems. To download this software management tool, go to
www.intermec.com/SmartSystems
•
the SmartSystems bundles you want to install. Bundles that
include the system software are available from
www.intermec.com. Go to Support > Downloads >
OS/Firmware/Drivers list.
After you locate these items, you can use SmartSystems to update the
mobile computer.
and click the Downloads tab.
CK3R and CK3X Mobile Computer User Manual