Menu Mode; Scanning; All Scan Inhibit - Simrad RS81 Instruction Manual

4 MENU MODE

NOTE

4.1 Scanning

E04572
Menu mode is used to adjust the various radio settings, such as
channels inhibited from scan modes, ID number programming
and User channel selection.
To enter menu mode, press S
to scroll through the options listed below:
• Scanning (section 4.1) covers options related to the vari-
ous scanning functions such as channel inhibit, memory
scan select and scan dwell time.
• Numbers (section 4.2) explains how to enter ID numbers
such as the Ship's MMSI and ATIS number.
• VHF Items (section 4.3) describes miscellaneous options
such as selection of a User channel, last used channel, inter-
rupt intercom and speaker settings.
To select an option press O
tion press O /C.
N
Entering menu mode will inhibit the operation of the radio.
Exit menu mode before returning the handset to the cradle to
permit normal operation.
In the Menu mode select Scanning by pressing O
▼
and keys to scroll through the following options:

• All scan inhibit

• All scan reset
• All scan show
• Memory scan select
• Memory scan clear
• Memory scan show
• Scan dwell time
To select an option press O
O /C.
N
4.1.1 All scan inhibit
If the radio is repeatedly locking onto a busy channel when
scanning, this channel can be excluded from the scan cycle.
Each option will be displayed for 2 seconds.
In Scanning mode press O
and select the "ALL INH" option, which will be displayed for 2
seconds. Press O again, then use the
K
the channel to be excluded, or, if the channel has been inhibited
Instruction manual
twice. Use the
HIFT
, to return to normal radio opera-
K
(section 4.1.1)
(section 4.1.2)
(section 4.1.3)
(section 4.1.4)
(section 4.1.5)
(section 4.1.6)
(section 4.1.7)
, to return to the main menu press
K
▲
, then use the and
K
▲ ▼
and
▲ and ▼ keys
▲
, using the
K
▼
keys to scroll
keys to select
25