The Radio Menus; Scan Menu - Simrad RS20 User Manual

2
¼ Note:

The radio menus

A long press of the MENU button opens MENU SELECT page. The
following shows the menu structure (top and 2nd level only):
ALL SCAN
ALL CHANNELS + 16
MY CHANNELS
SCAN
MY CHANNELS + 16
EDIT MY CHANNELS (choose channels)
DUAL WATCH
WATCH
TRI WATCH
SET WATCH CHANNEL (choose channel)
TIME DISPLAY
POS DISPLAY
DISPLAY
COG/SOG
BACKLIGHT
CONTRAST
SENSITIVITY
UIC
POWER OUTPUT
CH NAME
KEY BEEP
UNITS
RADIO SETUP
INT SPEAKER
EXT SPEAKER
GPS
TIME
VESSEL CALLSIGN
MENU TIMEOUT
DSC FUNCTION
USER MMSI
ATIS FUNCTION
SEA/INLAND USE
ATIS MMSI
DSC SETUP
INDIVIDUAL ACKN.
POS ACKNOWLEDGE
AUTO SWITCH
TEST ACKNOWLEDGE
RX DISTR WHILE OFF
DSC TIMEOUT
GPS ALERT
WX ALERT
ALARMS
DSC ALARM
RESET
Key:
(>) further menu options
(X) toggle selection. 'X' means option enabled.

Scan menu

This menu is for choosing a scan mode to enable, as well as
selection of the channels scanned per the MY CHANNELS list.
Scanning is not available if ATIS mode is turned on.
All scan
Scans all channels cyclically.
All channels + 16
Scans all channels cyclically, but checks the priority channel after
every channel step
The radio menus | RS20 operator manual
(ON / OFF)
(ON / OFF)
(ON / OFF)
(>)
(0-10)
(DISTANT/LOCAL)
(USA/INT'L/CANADA)
(HIGH/LOW)
(>)
(0-10)
(>)
(ON/OFF)
(ON/OFF)
(>)
(>)
(>)
(>)
(X)
(>)
(EU cloned radio only)
(ON/OFF)
(SEA/INLAND) (EU cloned radio only)
(>) (EU cloned radio only)
(AUTO/MANUAL)
(>)
(ON/OFF)
(AUTO/MANUAL)
(X)
(>)
(>)
(>) (US cloned radio only)
(>)
(YES/CANCEL)
| 15