Setting Up Speakers; Adjusting Independent Volumes; Lighting Modes - Simrad RS81 Instruction Manual

E04572

4.3.4.1 Setting up speakers

Speaker levels can be reset by pressing O
in the VHF Items submenu. Press O
tings submenu and use the
(see Fig 4.8 above).
Press O to reset all speaker settings to default. The display
K
will show "RESETTING" for 2 seconds.
Press O /C to exit this menu level, or use the
N
select another option.

4.3.4.2 Adjusting independent volumes

To set speakers' volume levels independently, select "SET
SPKRS" in the VHF Items submenu. Press O
speaker settings submenu and use the
station (e.g. "STATION 1").
Press O to initiate independent volume adjustment (see sec-
K
tion 3.5 for available settings). The radio will now emit a con-
tinuous 500Hz tone via the selected speaker. Adjust the volume
▲
level using the and
setting, which will be displayed and end the tone.
Press O /C to exit this menu level, or use the
N
select another option.

4.3.5 Lighting modes

The lighting mode allows adjustment of the level of lighting for
the station, the radio or the whole of the network. The chosen
mode can also be stored in separate banks for each individual
station connected to the radio.
In the VHF Items menu select O
▲ ▼
use the and keys to select "LIGHTING", press O
▲ ▼
Use the and keys to select either "STATION", "RADIO" or
"NETWORK" and press O
"SEL RADIO" and "SEL NET", respectively, to confirm the
choice. These displays will be shown for 2 seconds.
The selected lighting mode will be stored and available when
the radio is turned on next time.
K
to access the speaker set-
K
▲ ▼
and keys to select "DEFAULTS"
▲
and
▼
keys and press O
to enter the submenu and
K
. The display will show "SEL STN",
K
Instruction manual
to select "SET SPKRS"
▲ ▼
and keys to
to enter the
K
▼
keys to select a
to confirm the new
K
▲ ▼
and keys to
again.
K
33