All Scan Mode; Dynamic All Scan Inhibit - Simrad RS81 Instruction Manual

7.8 All scan mode

NOTE
NOTE
E04572
The scan function cycles the RS82 sequentially through each
enabled channel, pausing each time a signal is detected.
Press S followed by 1 (S
HIFT
All scan is selected while the handset is off the cradle, the dis-
play will show "PLACE BACK ON CRADLE". All scan will be
cancelled if the handset is not returned to the cradle within 10
seconds.
When the radio detects a signal, the display will change to
show the relevant channel number (Fig 7.7).
INT
Should the radio lock onto a busy channel, pressing O
manually continue the scan. All scan will otherwise automati-
cally restart when the channel becomes clear.
All other stations will also show the All scan display.
While in All scan mode, normal VHF functions are not avail-
able. To exit All scan, press 16 or O
the cradle.

7.8.1 Dynamic All scan inhibit

During All scan, if the radio repeatedly locks onto a busy chan-
nel, this channel can be excluded from scanning by pressing
then 1 (S
S
HIFT CAN
show "CHANNEL INHIBITED" and the channel will no
longer be included in the scan cycle.
The channel can be reinstated using Memory scan select
(please refer to section 8.1.4).
A ) to enter All scan mode. If
CAN LL
67
Fig 7.7 - All scan mode
/C, or lift the handset from
N
) while locked onto it. The display will
A
LL
Instruction manual
SCAN
ALL
will
K
49