Last Used Channel; Interrupt Intercom; Speaker Settings - Simrad RS81 Instruction Manual

RS81/RS82 VHF
INT
SET SPKRS
NOTE
32

4.3.2 Last used channel

Normally, the RS81 will power up on the pre-programmed
start-up channel (usually the priority channel). The Last used
channel function enables the radio to power up on the last used
channel (the default setting is "OFF").
Press O to enter the VHF Items submenu and use the
K
keys to select "LST CH", which will show either "Y[es]", or
"N[o]". Use the O
Press O /C to exit the submenu, or use the
N
select another option.

4.3.3 Interrupt intercom

This function is used to specify whether intercom functions
should be interrupted when an incoming VHF transmission is
received.
Press O to enter the VHF Items submenu and use the
K
keys to select "INT ICM Y" – note that the default setting is
"Y[es]". Use the O
Press O /C to exit the submenu, or use the
N
select another option.

4.3.4 Speaker settings

The speaker settings option is used to set the individual default
volume levels for each station and/or intercom in the system.
Press O to enter the VHF Items submenu and use the
K
keys to select "SET SPKRS", then press O
speaker settings menu, the display will show "DEFAULTS"
(Fig 4.8). Use the ▲
"STATION 2", then press O
16
00
Fig 4.8 - Resetting speaker settings to defaults
This menu has a wrap-around function.
Press O /C to exit, or use the
N
option.
key to toggle between "Y" and "N".
K
key to toggle between "Y" and "N".
K
and ▼ keys to choose "STATION 1" or
to confirm.
K
INT
DEFAULTS
▲ ▼
and
▲
and
▲ and ▼ keys to
▲
and
▲ and ▼ keys to
▲ and
again to enter the
K
16
00
keys to select another
E04572
▼
▼
▼