Installation and User Guide
1. Installation
1.1 In the package
living eco® is supplied with adapters for Danfoss RA valves and valves with M30 x 1.5 (K) connections, two alka-
line AA batteries and a 2 mm Allen key.
1.2 Inserting the batteries
Remove the battery cover and insert the two batteries. Make sure the batteries are correctly
oriented.
1.3 Setting the time and date when you start using living eco®
Once the batteries are installed
Set the time
Set date
Confirm setting
1.4 Installing living eco®
M must be flashing on the display prior to installing. If not, see Installation mode on page 11.
1. Start by mounting the adapter.
2. Tighten RA adapter using the 2 mm Allen key.
Hand-tighten K adapter (max. 5 Nm).
3. Screw the thermostat onto the adapter and tighten by hand
(max. 5 Nm).
4. Press
for approx. 3 seconds to enter the function menu.
5. A small M flashes, press
4
01/2013
living eco® Electronic Radiator Thermostat
The time will flash on the display - 23:59.
Set hours using
Set min. using
Set date using
Format: day/month/year (DD/MM/YYYY)
When
flashes, press
to fix the thermostat.
VIIDB102
and press
.
and press
.
and press
.
to confirm.
RA
K
Danfoss Heating Solutions