Konica Minolta BIZHUB 367 Installation Manual page 12

(4) Using a cleaning pad dampened with alcohol,
wipe the undersurface of the original cover,
where the original mat is attached.
(5) With the double-sided tape facing up, position
the original mat on the original glass.
Note:
• Place the original mat while pressing it up
against the mark
nal scale.
• Make sure that the three spacers are not run-
ning on the original scale.
(6) Peel the backing paper off the double-sided tape
on the original mat.
(7) Close the original cover and press gently.
at the left back of the origi-
Spacer
イラスト作成中
・両面テープ変更
・本体形状変更
(8) Open the original cover and press on the original
mat firmly so that it does not peel off.
(9) Remove the protective sheet while pressing the
original mat to prevent it from peeling off.
(10) Close the original cover.
E-12
イラスト作成中
・本体形状変更
イラスト作成中
・本体形状変更