Configuring Your Ethernet Connection; How To Use This Chapter - Arris Xfinity TG1682 User Manual

Getting
Safety Started
Battery
Installation Installation

Configuring Your Ethernet Connection

If your computer is equipped with a LAN card providing an Ethernet connection,
you may have to configure your computer's TCP/IP settings. The steps that follow
will guide you through setting your computer's TCP/IP settings to work with the
Telephony Gateway.
Requirements
Make sure you have the following before attempting to configure your Ethernet
connection:




How to use this chapter

The following list shows the procedures for modifying the TCP/IP settings on the
computer. The procedure is slightly different depending on the operating system
that you are using. Please ensure you are using the correct steps for the
operating system on your computer. Follow the links below for instructions to
configure your Ethernet connection on your operating system.



Note:
Xfinity TG1682 Telephony Gateway User's Guide
Ethernet
Configuration Usage
Computer with:
— one of: Windows XP, Windows Vista, Windows 7, Windows 8, or MacOS
X
— Ethernet interface
Ethernet cable (supplied)
IP address, subnet, gateway, and DNS information for installations not
using DHCP
TCP/IP Configuration for Windows XP
TCP/IP Configuration for Windows 7
TCP/IP Configuration for MacOS X
For Windows 8 and Windows Vista, use the Windows 7 procedure.
They are very similar.
A R R I S
Troubleshooting Glossary
24