Extended Run Time; Feature Confirmation Chart; Advanced Features: Installation- Programmable Options; Remote Door Locks - Autostart Two-Way Led Transmission Remote Starter User Manual

• Press the brake pedal.
• Press the
button then press and hold the
SHIFT
(the parking lights will flash once).
When the vehicle exits Cold Weather Mode, the Parking Lights will flash once.
If Safe Start is enabled, you can activate Cold Weather Mode by
• Pressing and releasing the
• Pressing and holding the

Extended Run Time

With the vehicle running under a remote start, pressing and holding the
than 1 second will reset the run time counter to zero and restart the run time cycle from the
beginning.
To stop the vehicle, at any moment, simply press the
be carried out once per remote start.
Example: if your Module is programmed for a run time of
running for 2 minutes already, pressing the
Engine will run for another cycle (in this case,

Feature Confirmation Chart

Feature
Lock
Unlock
Trunk
LED ON/OFF
Start
Running
Stop
Entering Cold
Weather Mode
Exiting Cold
Weather Mode
Home Valet
Valet Mode
Exit ValetMode
Fail Start Attempt
Advanced Features: Installation-programmable Options
The remote car starter was designed with flexibility and OEM integration in mind. With its program-
mable options, this unit can single-handedly control nearly any electrical system in your vehicle.
Caution
: The programming of your system should be left to a professional. Changing any
one of the settings may affect the operation of your Remote Car Starter.

Remote Door Locks

If your Remote Car Starter was installed with the Remote Door Locks option, you will have the
convenience of remote keyless entry. See section Arming the Starter Kill, earlier in this Guide, for
further instructions on remote door locking and unlocking.
User Guide
button, then
SHIFT
button until the parking lights flash 3 times.
START/STOP
LED #1 LED #2
3 flashes X
X 3 flashes
X X
3 flashes 3 flashes
X X
X X
X X
X X
X X
3 flashes X
3 flashes X
X 3 flashes
X X
button for 3 sec.
START/STOP
START/STOP
3 minutes and your vehicle has been
button will reset the counter to zero and the
START/STOP
3 minutes).
LED #3
X
X
3 flashes
X
X
X
X
X
X
X
X
X
X
button for more
START/STOP
button. This procedure can only
LED #4
X
X
X
X
3 flashes
3 flashes
3 flashes
3 flashes
3 flashes
3 flashes
3 flashes
3 flashes
4 flashes
Beep(s)
1
2
1
1
1
3
2
2
1
2
1
1
4
P. 7