How To Enter Cold Weather Mode; Extended Run Time; Advanced Features: Installation-Programmable Options; Remote Door Locks - Autostart CS-495iTW-FM User Manual

24 hours. The vehicle must be set in ready mode (manual transmission) before the cold weather
mode can be activated.
To enter Cold Weather Mode:
• Press and release the
appear, then press and hold the button for 3 seconds until the parking lights flash three times.
The remote control will beep once and the
To exit Cold Weather Mode, do any one of the following actions:
• Open the hood.
• Start the engine by remote.
• Turn the ignition key to the
• Press the
button until you hear a beep. Release the
display. Then press the button for 3 seconds (the parking lights will flash once).
When the system exits cold weather mode, the remote control will beep once and the
disappear.
To verify whether the system is in cold weather mode:
• The
icon should appear on your remote display.

How to enter Cold Weather Mode

Function Button pressed
To enter cold
weather mode
To exit cold
weather mode

Extended Run Time

While the vehicle is running under a remote start, pressing and holding the button for more
than 3 seconds will reset the run time counter to zero and restart the run time cycle from the
beginning. There will be one beep a pause three more beeps; the parking lights will flash
three times and the horn (if configured) will honk once. The extended run time procedure can
only be carried out once per remote start.
To stop the vehicle, at any moment, simply press the button.
Example: If your remote car starter is programmed for a run time of 3 minutes and your vehicle
has been running for 2 minutes already, pressing the
to zero and allow the engine to run for another cycle (in this case, 3 minutes).

Advanced Features: Installation-programmable Options

The remote starter was designed with flexibility and OEM integration in mind. With its program-
mable options, this unit can single-handedly control nearly any electrical system in your vehicle.
Caution
: The programming of your system should be left to a professional. Changing any
one of the settings may affect the operation of your remote starter.

Remote Door Locks

If your remote starter was installed with the remote door locks option, you will have the
convenience of remote keyless entry. See section Arming and Disarming the Remote Starter,
on page 7, for further instructions on remote door locking and unlocking.

Priority Door Access

If the remote door locks option is installed on your vehicle, this safety feature allows you unlock
solely the driver's door with a single press of the
of the button, all the other doors will unlock.
User Guide
button until you hear a beep. Release the
position.
IGNITION ON (RUN)
Icon
+
None
+
icon will appear on the display.
button and
Sound
Beep
Beep
button on the transmitter; upon a second press
button,
will appear on the
Instructions /description
Press and then press
and hold for 3 seconds.
button will reset the counter
will
icon will
P. 9