The Starter Kill And The Anti-Grind Feature; Extended Run Time; Advanced Features: Installation-Programmable Options; Passive Or Active Arming Of The Starter Kill - Autostart AS-3372 TW-FM User Manual

To exit Cold Weather Mode, do any one of the following actions:
•
Open the hood.
•
Start the engine by remote.
•
Turn the ignition key to the
•
Press and release the
The
LOCK
While the
The transmitter will beep once.
Keep pressing the
Release the
Its LED will flash quickly.
The parking lights will flash once.
To verify whether the system is in Cold Weather Mode (automatic transmissions only):
•
Press the brake pedal:
•
If the vehicle is in cold weather mode, the parking lights will stay on while the
pedal is pressed.

The Starter Kill and the Anti-grind Feature

With this added security feature, the system will prevent your vehicle from starting with the ignition
key when the Starter Kill is armed. If your Remote Car Starter was installed with the Starter Kill
option, one will not be able to start your vehicle with the key unless the system has been unlocked
and disarmed first, or put into Valet Mode.
Note: If the Starter Kill is installed, your vehicle will benefit from a protection against starter
motor damage that could occur after remote-starting the engine should the user, by force of
habit, turn the ignition key to the

Extended Run Time

With the vehicle running under a remote start, pressing and holding the
than 3 seconds will reset the run time counter to zero and restart the run time cycle from the
beginning:
•
Press and hold the
The transmitter will beep once.
•
Keep pressing on the
•
Release the
The
START/STOP
The parking lights will also flash 3 times slowly to confirm the extended run time
(the horn will also honk once if the horn option is configured).
To stop the vehicle, at any moment, simply press the
be carried out once per remote start.
Example: If your Module is programmed for a run time of 3 minutes and your vehicle has been
running for 2 minutes already, pressing the
Engine will run for another cycle (in this case, 3 minutes).

Advanced Features: Installation-programmable Options

The remote car starter was designed with flexibility and OEM integration in mind. With its program-
mable options, this unit can single-handedly control nearly any electrical system in your vehicle.
Caution
: The programming of your system should be left to a professional. Changing any
one of the settings may affect the operation of your Remote Car Starter. Please note that the
following programmable options may require additional parts and labor.

Passive or Active Arming of the Starter Kill

See section "Arming the Starting Kill" earlier in this guide.
P. 8
IGNITION ON (RUN)
button.
AUX
button on the transmitter will light up.
button is still lit up, press the
LOCK
START/STOP
button.
START/STOP
CRANK
START/STOP
START/STOP
button.
START/STOP
button will flash 3 times.
position.
START/STOP
button until the transmitter beeps once
position.
button for more than 3 seconds.
button until the transmitter beeps 3 times.
START/STOP
button will reset the counter to zero and the
START/STOP
button.
button for more
START/STOP
button. This procedure can only
User Guide