Vehicle Status Request - Autostart Two-Way Led Transmission Remote Starter User Manual

Your installer can customize the system as to personalize these multi-level features in an order that
best suits you. Your options are:
Level 1
(requires pressing the
Level 2
(requires pressing the
Level 3
(requires pressing the
Level 1
(requires pressing the
Level 2
(requires pressing the
Level 3
(requires pressing the
Level 1
(requires pressing the
Level 2
(requires pressing the
Level 3
(requires pressing the
Level 1
(requires pressing the
Level 2
(requires pressing the
Level 3 (
requires pressing the
Example: If the multi-level features have been modified from their default state to option 3, the
setup would be as follows:
For "Basic features":
To access the aux. 2 feature, the user needs to press on the
followed by the
LOCK
To access the status request feature, the user needs to press on the
times followed by the
To access cold weather mode, the user needs to press on the
followed by the
START/STOP

Vehicle Status Request

The status request feature allows the user to see the status of the vehicle i.e.: if the doors are
locked or unlocked or if the vehicle is in cold weather mode, home valet mode, in valet mode or
how much time is left in the run time cycle. The following charts (Tables 1, 2 and 3) indicate the
confirmation sequences.
To retrieve the vehicle status:
Press and release the
The transmitter will then flash the corresponding sequence of LEDs depending on the vehicle's
status.
If the engine is NOT running, refer to Table 1.
If the vehicle is in or out of ready mode, refer to Table 2
If the engine IS running under a remote start, refer to Table 3 (if the doors are locked)
or refer to Table 4 (if the doors are unlocked).
The status request feature is a two-step procedure:
• The first sequence of flashes denotes if the vehicle's doors are locked or unlocked.
• The second sequence of flashes (if applicable) denotes if the vehicle is Cold weather mode,
Home valet mode, or, Valet mode.
• If there is no second sequence transmission, then the vehicle is none of the three (3) mentioned
features (Cold weather mode, Home valet mode or Valet mode).
User Guide
button 1X)
SHIFT
button 2X)
SHIFT
button 3X)
SHIFT
button 1X)
SHIFT
button 2X)
SHIFT
button 3X)
SHIFT
button 1X)
SHIFT
button 2X)
SHIFT
button 3X)
SHIFT
button 1X)
SHIFT
button 2X)
SHIFT
button 3X)
SHIFT
button.
button.
TRUNK
button..
button then press and release the
SHIFT
Option 1:
Multi car operation
Basic features
Customized features
Option 2:
Basic features
Multi car operation
Customized features
Option 3:
Customized features
Multi car operation
Basic features
Option 4:
Basic features
Customized features
Multi car operation
SHIFT
TRUNK
button three (3) times
button three (3)
SHIFT
button three (3) times
SHIFT
button (there will be a beep).
P. 11