Installation
Remove all packing materials from the
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Control Modes
FUNCTIONS:
There are 5 modes:
One Spectral (Static
1) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2) When the Spectral is not connected by a DMX-cable, it functions as a stand-alone device. Please
see page 16 for more information about the static colors.
One
Spectral (7-color
1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2. When the Spectral is not connected by a DMX-cable, it functions as a stand-alone device. Please
see page 17 for more information about the 7-color jump.
One
Spectral (Built-in
3. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
4. When the Spectral is not connected by a DMX-cable, it functions as a stand-alone device. Please
see page 17 for more information about the built-in programs.
Spectral
• Static Colors (manual)
• 7-color jump Speed controlled
• Built-in programs (Auto) Speed controlled
• Master/Slave
• DMX512 (3, 6 or 7 Channels)
Colors)
Jump)
Programs)
D5000. Check that all foam and plastic padding is
9
Need help?
Do you have a question about the Spectral D5000 and is the answer not in the manual?